Home > Video&Audio > Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz

Video&Audio > Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz

Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz

Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz

Product Model:LT-HHA02
This HDMI audio signal extractor/ Analog Audio Converter Separator with one HDMI input and one HDMI output one SPDIF output and RCA L / R stereo audio output. Support 1080P and 3D.
Now you can output high-definition screen easily,adjust the output volume freely! 
Specifications:
HDMI resolution:1080P/1080i/720p/576p/576i/480p/480i
Support video color format:24bit/deep color 30bit,36bit
Audio output:L/R+SPDIF
Max bandwidth:225MHz
Max baud rate:6.75Gbps Input/Output TMDS signal:0.5~1.5Volts p-p(TTL)
Input/Output DDC signal:5Volts p-p (TTL)
Max working current:500mA
Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V;Output: DC5V/1A
Operating Temperature range:(-15 to +55 degree)
Operating Humidity range:5 to 90%RH (No Condensation)
Dimension (L x W x H):84.5X61.8X21 (mm)
Weight:132g
No loss of quality 
Input cable distance≤15m AWG26 HDMI standard cable 
Output cable distance≤15m AWG26 HDMI standard cable
NOTE:
Switch the audio switch in the front. Change it between 2CH, 5CH or pass.
Turn Off Dolby Digital Plus
PASS: HDMI pass mode. The audio and video can be convertered from the HDMI output. SPDIF and L/R will not output any sound. 
2CH: 2 channel stereo mode. Source device will send 2CH PCM stereo audio in HDMI which can be converted to 2CH analog stereo and output via RCA L/R (SPDIF and HDMI also have stereo audio output at the same time).
5.1CH: 5.1 channel mode.Source device sends Dolby Digital / DTS which can be extracted via SPDIF out; The RCA L/R output will not have sound. SPDIF does NOT support 5.1 Dolby 
Digital Plus. Please turn off Dolby Digital Plus for Amazon Fire TV,Apple TV,Roku and Chromecast if no sound

Product Model:LT-EXA01

Introductions

 

The Stereo HI-FI RCA RL Audio Balun Extender Over Cat5e 1000 meter Passive allows  one  Analog  Stereo Hi-Fi R/L Audio to  be  transmitted Via Cat5/5e/6 Cable up  to  3250ft( 1000m )in a  point - to -  point connection .it  is built  in surge suppressor  to  protect Audio equipment against damaging voltage  spikes  . its   integrated   ground  loop  isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applicationswhere full-range ,hi-fidelity  audio  frequency response is required.Used in pairs, the Stereo Hi-Fi Audio Balun eliminates costly and bulky coaxial cable,allowing audio equipment to be  connected or moved within a structured cabling environment.Mainly applicated for Boardroom systems, classroom training, Auditoriums, custom home installations and intercom systems.

 

Specifications

1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5/5e/6

20 Hz to 20 KHz bandwidth

Full ground-loop immunity in Audio

Built in TVS for surge protection

Audio Inputs support line level unbalanced Audio

Quicker moves, adds, and change

Setup Guide

Plug the Left(White) and Right(Red) Stereo Audio RCA Connectors of  the transmission Balun into the HI-FI Audio output of the source component ,  plug the  Left(White) and Right(Red)RCA connectors from  the  Receive  Balun into your desired input component. Insert the CAT5 cable into both ends of the Baluns. You may use standard EIA 568A/B Termination.

Specifications:

3dB Bandwidth;  20 Hz to 20 KHz over the distance range

Maximum Input:   1.1Vp-p

Insertion Loss per balun pair:    Less than 2 dB over the frequency range.

Common Mode Rejection:  Greater than 60 dB @ 1KHz

Greater than 40 dB over the frequency and distance range

THD:  Maximum 0.007% @ 1 KHz over distance range

Audio Source Impedance:   100 ohms maximum

Audio Receiver Impedance:    10 k ohms minimum

Max. Distance – Cat5e/6 UTP :   3250ft (1,000m)

Pin Configuration (RJ45) EIA 568 A or B:  Audio 1 (White): pins 1[R] & 2 [T] Audio 2 (Red): pins 7 [R] & 8 [T]

Cable – UTP :   24AWG or lower solid copper twisted pair wire 

Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz

Connectors:  Two RCA-F connectors for audio:white red RJ45 for twisted pair

Temperature:  Operating: 0° to 55°C      Storage: -20° to 85°C       Humidity: Up to 95% non-condensing

Dimensions(packaging):   155*80*30mm(including one pair of Balun)

Weight(packaging):   300g

 

Package Contents:


1pc RCA Balun Sender
1pc 
RCA Balun Receiver

1pc Operation Manual