Product Model:LT-HHA02

This HDMI audio signal extractor/ Analog Audio Converter Separator with one HDMI input and one HDMI output one SPDIF output and RCA L / R stereo audio output. Support 1080P and 3D.

Now you can output high-definition screen easily,adjust the output volume freely! 

Specifications:

HDMI resolution:1080P/1080i/720p/576p/576i/480p/480i

Support video color format:24bit/deep color 30bit,36bit

Audio output:L/R+SPDIF

Max bandwidth:225MHz

Max baud rate:6.75Gbps Input/Output TMDS signal:0.5~1.5Volts p-p(TTL)

Input/Output DDC signal:5Volts p-p (TTL)

Max working current:500mA

Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V;Output: DC5V/1A

Operating Temperature range:(-15 to +55 degree)

Operating Humidity range:5 to 90%RH (No Condensation)

Dimension (L x W x H):84.5X61.8X21 (mm)

Weight:132g

No loss of quality 

Input cable distance≤15m AWG26 HDMI standard cable 

Output cable distance≤15m AWG26 HDMI standard cable

NOTE:

Switch the audio switch in the front. Change it between 2CH, 5CH or pass.

Turn Off Dolby Digital Plus

PASS: HDMI pass mode. The audio and video can be convertered from the HDMI output. SPDIF and L/R will not output any sound. 

2CH: 2 channel stereo mode. Source device will send 2CH PCM stereo audio in HDMI which can be converted to 2CH analog stereo and output via RCA L/R (SPDIF and HDMI also have stereo audio output at the same time).

5.1CH: 5.1 channel mode.Source device sends Dolby Digital / DTS which can be extracted via SPDIF out; The RCA L/R output will not have sound. SPDIF does NOT support 5.1 Dolby 

Digital Plus. Please turn off Dolby Digital Plus for Amazon Fire TV,Apple TV,Roku and Chromecast if no sound

Product Model:LT-EXA02

The Composite Video/Stereo Hi-Fi Audio Balun that allows one Composite video, one  Stereo Hi-Fi Audio to be  transmitted  Via Cat5e/6 Cable,up to 1000ft(305m) in  a  point-to-point connection.it is built in surge  suppressor to protect Video and Audio   equipment against  damaging  voltage  spikes . its  integrated ground loop isolation prevents  annoying "hum - bars" common  noise  with  long  distance installations. The  product  is  designed for classroom video distribution,commercial and home audio/video systems ,hospital video training,video conferencing ,  and  video  kiosks Boardroom systems and so on.Used in pairs,Working With MB-CA1000,the Composite/Audio can be transmitted up to 3250ft(1000m). the  Video/Audio Balun  eliminates costly and bulky coaxial  cable,allowing Video/audio equipment to be connected or moved within a structured cabling environment.

Specifications

1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5/5e/6

Video up to 2,200 feet (670m) via Cat5e/6

20 Hz to 20 KHz bandwidth

Full ground-loop immunity in Audio

Built in TVS for surge protection

Audio Inputs support line level unbalanced Audio

Quicker moves, adds, and change

Setup Guide

Plug the RCA connectors of the transmit Balun into the Video and Audio outputs of the source component you wish to transmit. Plug the Video and Audio connectors from the receive Balun into your desired input component. Insert the CAT5 cable into both ends of the Baluns. You may use standard EIA 568A/B termination.

Specifications:

Audio

Bandwidth;  20 Hz to 20 KHz over the distance range

Maximum Input:   1.1Vp-p

Impedance:  600 ohms min

Insertion Loss per balun pair:    Less than 2 dB over the frequency range.

Common Mode Rejection:  Greater than 40 dB over the frequency and distance range

THD:  Maximum 0.007% @ 1 KHz over distance range

Audio Source Impedance:   100 ohms maximum

Audio Receiver Impedance:    10 k ohms minimum

Max. Distance – Cat5e/6 UTP :   3250ft (1,000m)

Pin Configuration (RJ45) EIA 568 A or B:  Audio 1 (White): pins 1[R] & 2 [T] Audio 2 (Red): pins 7 [R] & 8 [T]

Cable – UTP :   24AWG or lower solid copper twisted pair wire 

Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz

 Connectors:  Two RCA-F connectors for audio:white red :  yellow for video. RJ45 for twisted pair

Temperature:  Operating: 0° to 55°C      Storage: -20° to 85°C       Humidity: Up to 95% non-condensing

Video

Bandwidth; 6 MHz, 3 dB roll off

Maximum Input:   1.1Vp-p

Impedance:  75 ohms

Insertion Loss per balun pair:   Less than 2 dB per pair over the frequency range from DC to 6 MHz

Common Mode Rejection: Greater than 40 dB over the frequency range

Max. Distance Color via Cat 5E/6 UTP/STP Cable:  1000 ft (305 m)

Pin Configuration (RJ45):Video: Pins 4(R) &5(T)

Dimensions(packaging):   155*80*30mm(including one pair of Balun)

Weight(packaging):   260g

Package Contents:

1pc RCA Balun Sender
1pc RCA Balun Receiver

1pc Operation Manual