Home > 2 Channel Canon XLR Analog Audio Extender over Cat5e RJ45 Networking Audio balun for microphone amplifier hifi

2 Channel Canon XLR Analog Audio Extender over Cat5e RJ45 Networking Audio balun for microphone amplifier hifi

2 Channel Canon XLR Analog Audio Extender over Cat5e RJ45 Networking Audio balun for microphone amplifier hifi

2 Channel Canon XLR Analog Audio Extender over Cat5e RJ45 Networking Audio balun for microphone amplifier hifi

 


Product Model:LT-AED08


Introduction


This Audio Balun encodes the professional balanced audio and then transmitters the signal via cat5/6 cable with eliminate noise and 2kv sruge 

protection up to 1250m(max),and then Receives the signal and decodes to output(0.007%).it ensure the all the aspects of sound performance can meet a 

strict standards level.it use advanced spread-spectrum technology to transmitte dual professional balanced audio via cat5/6 up to 1250,
Also it uses special audio isolation transform technology ,so it can prevents annoying"Hum""buzz"clicks"pops"common noise with long transmission,It 

can reture your 2CH professional balanced sound after long distance transmission with just0.007% at max THD and 2db at max insertion loss.it has 20hz 

to 20Khz bandwidth to transmitte one Hi-Fi audio with 20hz to 20khz bandwidth and it does not need power to work.with built-in two -class surge 

suppressor to protect audio equipment against damaging voltage spikes.8KV ESD protection for balanced XLR audio interface ,2KV surge protection for 

RJ45 interface.


Specifications:
bandwith:20hz to20Khz
Maxiumum input:2.3vp-p
Input and output impedance:600Ω
insertionloss:1db(max)
signal reflectance:45db(min)
CMR::60db(max)
distance::1250m(max)
insulation Voltage:800V(min)
THD:0.007%(max)
Cable-UTP:impedance:100Ω   Max capacitance 20pf/ft

Surge Protection:
XLR interface:6kv IEC61000-4-8
RJ45 interface:2kv IEC61000-4-5

ESD protection:
1A touch dischargeIII
1B air dischargeIII
IEC61000-4-2

Pin configuration: Audio pins 1(R) and 2(T),Pins 7(R) and 8(T)
Connectors : 
Two XLR-F and XLR-M Connectors
RJ45 for twisted pair
Screw terminal for ground connect

Temperature:
Operating:0 to 55
Storage:-20 to 85
Humidity:up to 95% non-condersing

Enclosure:Aluminumalloy

Dimensions(packaging):17x13x6cm
weight(packaging):417g
             
Noted: you may use standard EIA 568A/B Termination ad ground connect is suggested to connect to protect audio equipments against damaging


Product Model:LT-AED08


Introduction


This Audio Balun encodes the professional balanced audio and then transmitters the signal via cat5/6 cable with eliminate noise and 2kv sruge 


protection up to 1250m(max),and then Receives the signal and decodes to output(0.007%).it ensure the all the aspects of sound performance can meet a 


strict standards level.it use advanced spread-spectrum technology to transmitte dual professional balanced audio via cat5/6 up to 1250,

Also it uses special audio isolation transform technology ,so it can prevents annoying"Hum""buzz"clicks"pops"common noise with long transmission,It 


can reture your 2CH professional balanced sound after long distance transmission with just0.007% at max THD and 2db at max insertion loss.it has 20hz 


to 20Khz bandwidth to transmitte one Hi-Fi audio with 20hz to 20khz bandwidth and it does not need power to work.with built-in two -class surge 


suppressor to protect audio equipment against damaging voltage spikes.8KV ESD protection for balanced XLR audio interface ,2KV surge protection for 


RJ45 interface.



Specifications:

bandwith:20hz to20Khz

Maxiumum input:2.3vp-p

Input and output impedance:600Ω

insertionloss:1db(max)

signal reflectance:45db(min)

CMR::60db(max)

distance::1250m(max)

insulation Voltage:800V(min)

THD:0.007%(max)

Cable-UTP:impedance:100Ω   Max capacitance 20pf/ft


Surge Protection:

XLR interface:6kv IEC61000-4-8

RJ45 interface:2kv IEC61000-4-5


ESD protection:

1A touch dischargeIII

1B air dischargeIII

IEC61000-4-2


Pin configuration: Audio pins 1(R) and 2(T),Pins 7(R) and 8(T)

Connectors : 

Two XLR-F and XLR-M Connectors

RJ45 for twisted pair

Screw terminal for ground connect


Temperature:

Operating:0 to 55

Storage:-20 to 85

Humidity:up to 95% non-condersing


Enclosure:Aluminumalloy


Dimensions(packaging):17x13x6cm

weight(packaging):417g

             

Noted: you may use standard EIA 568A/B Termination ad ground connect is suggested to connect to protect audio equipments against damaging