Home > Video&Audio > Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz
Products Catalogue
Contact Us
Tel: 86-755-29812360
Fax:86-755-29812361
Add:3 Floor, Block 3,Cichang industrial Zone,Longgang District,Shenzhen 518115,Guangdong,China
E-mail: sales@lengtion.com
Tags
Video&Audio > Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz
Analog Stereo HI-FI RCA RL Audio Balun Extender Over UTP Cat5e RJ45 1000 meter Passive 20 Hz to 20 KHz
Product Model:LT-HHA02
This HDMI audio signal extractor/ Analog Audio Converter Separator with one HDMI input and one HDMI output one SPDIF output and RCA L / R stereo audio output. Support 1080P and 3D.
Now you can output high-definition screen easily,adjust the output volume freely!
Specifications:
HDMI resolution:1080P/1080i/720p/576p/576i/480p/480i
Support video color format:24bit/deep color 30bit,36bit
Audio output:L/R+SPDIF
Max bandwidth:225MHz
Max baud rate:6.75Gbps Input/Output TMDS signal:0.5~1.5Volts p-p(TTL)
Input/Output DDC signal:5Volts p-p (TTL)
Max working current:500mA
Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V;Output: DC5V/1A
Operating Temperature range:(-15 to +55 degree)
Operating Humidity range:5 to 90%RH (No Condensation)
Dimension (L x W x H):84.5X61.8X21 (mm)
Weight:132g
No loss of quality
Input cable distance≤15m AWG26 HDMI standard cable
Output cable distance≤15m AWG26 HDMI standard cable
NOTE:
Switch the audio switch in the front. Change it between 2CH, 5CH or pass.
Turn Off Dolby Digital Plus
PASS: HDMI pass mode. The audio and video can be convertered from the HDMI output. SPDIF and L/R will not output any sound.
2CH: 2 channel stereo mode. Source device will send 2CH PCM stereo audio in HDMI which can be converted to 2CH analog stereo and output via RCA L/R (SPDIF and HDMI also have stereo audio output at the same time).
5.1CH: 5.1 channel mode.Source device sends Dolby Digital / DTS which can be extracted via SPDIF out; The RCA L/R output will not have sound. SPDIF does NOT support 5.1 Dolby
Digital Plus. Please turn off Dolby Digital Plus for Amazon Fire TV,Apple TV,Roku and Chromecast if no sound
Product Model:LT-EXA01
The Stereo HI-FI RCA RL Audio Balun Extender Over Cat5e 1000 meter Passive allows one Analog Stereo Hi-Fi R/L Audio to be transmitted Via Cat5/5e/6 Cable up to 3250ft( 1000m )in a point - to - point connection .it is built in surge suppressor to protect Audio equipment against damaging voltage spikes . its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applicationswhere full-range ,hi-fidelity audio frequency response is required.Used in pairs, the Stereo Hi-Fi Audio Balun eliminates costly and bulky coaxial cable,allowing audio equipment to be connected or moved within a structured cabling environment.Mainly applicated for Boardroom systems, classroom training, Auditoriums, custom home installations and intercom systems.
Specifications
1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5/5e/6
20 Hz to 20 KHz bandwidth
Full ground-loop immunity in Audio
Built in TVS for surge protection
Audio Inputs support line level unbalanced Audio
Quicker moves, adds, and change
Setup Guide
Plug the Left(White) and Right(Red) Stereo Audio RCA Connectors of the transmission Balun into the HI-FI Audio output of the source component , plug the Left(White) and Right(Red)RCA connectors from the Receive Balun into your desired input component. Insert the CAT5 cable into both ends of the Baluns. You may use standard EIA 568A/B Termination.
Specifications:
3dB Bandwidth; 20 Hz to 20 KHz over the distance range
Maximum Input: 1.1Vp-p
Insertion Loss per balun pair: Less than 2 dB over the frequency range.
Common Mode Rejection: Greater than 60 dB @ 1KHz
Greater than 40 dB over the frequency and distance range
THD: Maximum 0.007% @ 1 KHz over distance range
Audio Source Impedance: 100 ohms maximum
Audio Receiver Impedance: 10 k ohms minimum
Max. Distance – Cat5e/6 UTP : 3250ft (1,000m)
Pin Configuration (RJ45) EIA 568 A or B: Audio 1 (White): pins 1[R] & 2 [T] Audio 2 (Red): pins 7 [R] & 8 [T]
Cable – UTP : 24AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz
Connectors: Two RCA-F connectors for audio:white red RJ45 for twisted pair
Temperature: Operating: 0° to 55°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing
Dimensions(packaging): 155*80*30mm(including one pair of Balun)
Weight(packaging): 300g
Package Contents:
1pc RCA Balun Sender
1pc RCA Balun Receiver
1pc Operation Manual
Previous
Next
-
HDMI to Scart Composite TV Video... -
4K 3D 2.1CH 5.1CH HDMI Audio... -
1x2 HDMI EDID Amplifier Splitter... -
HDMI Splitter 4 Port 1x4 v1.3 with... -
3D EDID 8 Port HDMI Balun Extender... -
HDMI splitter 1 in 2 out 1x2 switch... -
YPBPR CVBS AV VGA Audio HDMI All to... -
Wireless HDMI Audio Video... -
4X1 Quad Multi-Viewer Seamless HDMI... -
Decorative Wall Plate HDMI Over... -
4K UHD HDMI Extender Amplifier... -
Composite 3 RCA Video Stereo Audio... -
HDMI to AHD Network NVR XVR HVR... -
TVI to HDMI Video Converter with... -
3 Port HDMI Switch Switcher... -
16 port 16x1 HDMI SwitcherSwitch... -
4K 2x1 MHL HDMI Switch with Audio... -
3x1 3 Port 1.4v HDMI Switch with... -
1.4v HDMI 5x1 Switcher 3D ARC With... -
HDMI Switch 3 Port 4K*2K Ultra HD... -
4 Port HDMI 1.4 Selector 4 In 1 Out... -
HDMI to TVI Converter With TVI... -
BNC to HDMI Converter For CCTV... -
1x4 3G-HD SD-SDI Video Splitter BNC... -
3G HD SDI to HDMI with SDI loop out... -
3G SDI to HDMI+DVI Converter Allows... -
Scart to HDMI Converter Audio Video... -
VGA To SCART Composite Video... -
HDMI To SCART Composite Video... -
DVI and Audio to HDMI and DVI R/L...