Volume controlable Digital Optical Toslink Coaxial Audio to Digital Optical Coaxial Analog 3.5mm and 2 RCA with Amplifier

Product Model:LT-DAC06

Digital Optical Toslink Coaxial Audio to Digital Optical Coaxial Analog 3.5mm and 2 RCA with Amplifier Volume Control

This Audio Converter Is Designed For Home Or Professional Audio Switching. It Converts Coaxial Or Toslink Digital Audio Signals To Digital Coaxial / Toslink /Analog L / R Audio And 3.5mm Stereo Audio

The Converter Is Small And Easy To Install. With A Built-In High-Fidelity Audio Amplifier Chips, You Can Control The Volume Via Knob.

Also The Headphones And 2RCA Output Port Can Easily Push 16-300 Ohm High-Fidelity Headphones. The Product Also Supports Toslink Input To Toslink, Coaxial Output, Coaxial Input To Toslink, Coaxial Output.

FEATURES

This Converter Has Many Features That Enable Its Good Performance,Among Those Features You Will Find:

   Converts Coaxial Or Toslink Digital Audio Signals To Analog L/R Audio

   Supports Sampling Rate At 32kHz, 44.1kHz, 48kHz, 96kHz And 192kHz, Up To 24-Bit Resolution

   24-Bit S/PDIF Incoming Bit Stream On Left And Right Channels

   Supports 16-300 Ohm High-Fidelity Headphones

   Support Power Off

   Support PCM/LPCM Audio 

   Switch Selectable Coaxial Or Optical Input

   Supports Toslink Input To Coaxial Output

   Supports Coaxial Input To Toslink Output

   Support All Output Audio Simultaneously. 

   Support Volume Adjustment.Easy To Use With Volume Control Knob Design. 

1, This Audio Converter Does Not Decode 5.1CH Dolby, DTS, Or Other Surround Sound Signals. It Converts 2CH PCM Digital Audio To 2CH Analog Audio. If "Da...Da…Da..." Or Thumping Sound Is Heard, It Indicates The Input Audio Format Is Not Supported. Here Are Some Tips For Your Reference:

* For TV, Go To Audio Setting -> SPDIF Type -> Choose PCM Or LPCM

* For Xbox, Go To Settings -> System -> Console Settings -> Audio / Digital Output -> Choose Digital Stereo Instead Of Dolby

* For PS3, Go To Settings -> Sound Settings -> Audio Output Settings -> Optical Digital

* If You're Using Apple TV, Be Sure To Set Dolby Digital To "Off". 

2, Adjustable Volume Just For 3.5mm Headphone Port And 2RCA.Not Work For Optcial And Coaxial.