Home > SD-SDI HD-SDI 3G-SDI Splitter 1x2 BNC 1 input and 2 outputs for Monitor Camera DVR VCR CCTV Video Encoder Broadcast

SD-SDI HD-SDI 3G-SDI Splitter 1x2 BNC 1 input and 2 outputs for Monitor Camera DVR VCR CCTV Video Encoder Broadcast

SD-SDI HD-SDI 3G-SDI Splitter 1x2 BNC 1 input and 2 outputs for Monitor Camera DVR VCR CCTV Video Encoder Broadcast

SD-SDI HD-SDI 3G-SDI Splitter 1x2 BNC 1 input and 2 outputs for Monitor Camera DVR VCR CCTV Video Encoder Broadcast

 

Product Model:LT-SDAC01
SD HD 3G SDI to Composite RCA Video + L/R Analog Stereo Audio Converter Scaler with SDI loop out
The SDI to AV scaler converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on CRT or HDTV while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on TV thanks to the built in this converter. Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI and AV at the same time. 
Features
Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s
Equalized and re-clocked loop output
Auto video mode detection (3G/HD/SD)
Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit
Connect with other units to extend your signal over long distances
Simultaneous display with SDI /AV signals
Alternative audio output to analog 2CH
Supports signal transmission distances of up to 300M for SD signals, 200M for HD signals and 100M for 3G signals
Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable.
Package
3G SDI to AV Sclaer Converter
5V DC Power Supply Adaptor
Specifications
SMPTE Standard              425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates    2.970 Gbit/s and 2.970/1.001 Gbit/s
SDI in/out Resolution      SD: 480i@60, 576i@50  HD:720p@50/60, 1080i@50/60               
                        3G:1080p@24/25/29.97/30/50/59.94/60 
CVBS Output Resolution   PAL/NTSC-M 
Input Port 1 x BNC (SD/HD/3G-SDI)
Output Port         1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS,L/R) 
Power Supply DC 5V -12V  
ESD Protection Human body model ±8kV (air-gap discharge) ,
                                  ±4kV (contact discharge)
Dimension        95mm x 60mm x 25 mm
Weight   260g
Operating Temperature  0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature  -20°C ~ 60°C / -4°F ~ 140°F
elative Humidity           20 ~ 90% RH (Non-condensing)
Power Consumption (Max)  5W

Product Model:LT-SDP0102


1×2 SDI splitter distributes allows 1 SDI, HD-SDI or 3G-SDI video source to 2 SDI/HD-SDI/3G-SDI displays simultaneously. This product built-in automatic identification and compatible with SD-SDI, HD-SDI, 3G-SDI all format of SDI signal. It is the support 2.97Gbps bandwidth, and supports lossless transmission over long distances.


II. Features

1.1 SDI input signal split to 2 SDI sink devices.

2.Supports SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.

3.Built-in cable equilibrium, clock recovery and drive.

4.Supports resolutions up to 1920x1080@60Hz.

5.Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.

6.Supports 5V voltage input.

 

III. Package

1.1x2 SDI Splitter --------- 1PCS

2.5V1A DC Power Supply adapter ----- 1PCS

3.Operation Manual -------- 1PCS


IV. Specifications

1.Frequency Bandwidth 3Gbps 

2.SDI Splitter Input Ports 1 x BNC Female input port 

3.SDI Splitter Output Ports 2 x BNC Female output ports

4.Power Supply DC 5V 1A

5.ESD Protection Human Body Model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

6.Dimensions (mm) 65(W) X 107 (D) X 25 (H)

7.Weight 195g 

8.Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F

9.Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F

10.Relative Humidity 20 ~ 90% RH (Non-condensing)